A key feature of this method is a Monte Carlo computational model of the reference KAP meter. It is used to calculate beam quality correction factors for transfer of the calibration coefficient at the standards laboratory to any beam quality used in the clinic on patients. The figure shows the variation in energy imparted per unit dose to the KAP meter’s air cavities as function of photon energy for different thicknesses of the conducting layer. This large variation is the main cause of the KAP meter’s energy dependence and causes the bias.
We found large biases of built-in KAP meter readings and hence energy dependent calibration factors are needed for unbiased PKA. Correcting for this large bias, the uncertainty in the KAP meter reading can be much reduced. This improved accuracy makes systematic efforts to further reduce patient dose meaningful, while maintaining sufficient image quality for correct diagnosis or safe surgery.
- For more details see: Alexandr Malusek, Ebba Helmrot, Michael Sandborg, Jan-Erik Grindborg and Gudrun Alm Carlsson In-situ calibration of clinical built-in KAP meters with tracability to a primary standard using a reference KAP meter. Phys. Med. Biol. 59, 7195-7210 (2014).
The figure shows the energy imparted (Eimp) in the KAP meter per air kerma at the KAP meter as fubction of the photon energy for three thicknesses of the conducting layer.