Software Design and Construction, 6 credits

Avancerad programvarudesign, 6 hp

TDDE45

Main field of study

Information Technology Computer Science and Engineering Computer Science

Course level

Second cycle

Course type

Programme course

Examiner

Martin Sjölund

Director of studies or equivalent

Ola Leifler

Education components

Preliminary scheduled hours: 40 h
Recommended self-study hours: 120 h

Available for exchange students

Yes
ECV = Elective / Compulsory / Voluntary
Course offered for Semester Period Timetable module Language Campus ECV
6IDAT Computer Engineering, B Sc in Engineering (Software Engineering) 5 (Autumn 2019) 1 4 English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering (International Software Engineering) 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering (International Software Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering (Large Scale Software Engineering) 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering (Programming and Algorithms) 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering (Programming and Algorithms) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering (Secure Systems) 7 (Autumn 2019) 1 4 English Linköping, Valla C
6CDDD Computer Science and Engineering, M Sc in Engineering (Secure Systems) 9 (Autumn 2019) 1 4 English Linköping, Valla C
6CDDD Computer Science and Engineering, M Sc in Engineering (Systems Technology) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CMJU Computer Science and Software Engineering, M Sc in Engineering 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CMJU Computer Science and Software Engineering, M Sc in Engineering (International Software Engineering) 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CMJU Computer Science and Software Engineering, M Sc in Engineering (International Software Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CMJU Computer Science and Software Engineering, M Sc in Engineering (Large Scale Software Engineering) 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CMJU Computer Science and Software Engineering, M Sc in Engineering (Programming and Algorithms Specialization) 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CMJU Computer Science and Software Engineering, M Sc in Engineering (Programming and Algorithms Specialization) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CMJU Computer Science and Software Engineering, M Sc in Engineering (Secure Systems) 7 (Autumn 2019) 1 4 English Linköping, Valla C
6MDAV Computer Science, Master's Programme 1 (Autumn 2019) 1 4 English Linköping, Valla E
6MDAV Computer Science, Master's Programme 3 (Autumn 2019) 1 4 English Linköping, Valla E
6MICS Computer Science, Master's Programme 3 (Autumn 2019) 1 4 English Linköping, Valla E
6MICS Computer Science, Master's Programme (Programming and Software Methods) 3 (Autumn 2019) 1 4 English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Chinese 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Chinese (Master Profile Computer Science and Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla C
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Chinese (Specialization Computer Science and Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - French 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - French (Master Profile Computer Science and Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla C
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - French (Specialization Computer Science and Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - German 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - German (Master Profile Computer Science and Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla C
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - German (Specialization Computer Science and Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Japanese 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Japanese (Master Profile Computer Science and Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla C
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Japanese (Specialization Computer Science and Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Spanish 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Spanish (Master Profile Computer Science and Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla C
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Spanish (Specialization Computer Science and Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIII Industrial Engineering and Management, M Sc in Engineering 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIII Industrial Engineering and Management, M Sc in Engineering (Computer Science and Engineering Specialization) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CIII Industrial Engineering and Management, M Sc in Engineering (Master Profile Computer Science and Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla C
6CITE Information Technology, M Sc in Engineering 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CITE Information Technology, M Sc in Engineering (International Software Engineering) 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CITE Information Technology, M Sc in Engineering (International Software Engineering) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CITE Information Technology, M Sc in Engineering (Large Scale Software Engineering) 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CITE Information Technology, M Sc in Engineering (Programming and Algorithms Specialization) 7 (Autumn 2019) 1 4 English Linköping, Valla E
6CITE Information Technology, M Sc in Engineering (Programming and Algorithms) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CITE Information Technology, M Sc in Engineering (Secure Systems) 7 (Autumn 2019) 1 4 English Linköping, Valla C
6CITE Information Technology, M Sc in Engineering (Systems Technology) 9 (Autumn 2019) 1 4 English Linköping, Valla E
6CMEN Media Technology and Engineering, M Sc in Engineering 7 (Autumn 2019) 1 4 English Linköping, Valla E

Main field of study

Information Technology, Computer Science and Engineering, Computer Science

Course level

Second cycle

Advancement level

A1X

Course offered for

  • Master's Programme in Computer Science
  • Computer Engineering, B Sc in Engineering
  • Computer Science and Engineering, M Sc in Engineering
  • Information Technology, M Sc in Engineering
  • Media Technology and Engineering, M Sc in Engineering
  • Computer Science and Software Engineering, M Sc in Engineering
  • Industrial Engineering and Management - International, M Sc in Engineering
  • Industrial Engineering and Management, M Sc in Engineering

Specific information

The course can not be included in degree together with TDDB84.

Entry requirements

Note: Admission requirements for non-programme students usually also include admission requirements for the programme and threshold requirements for progression within the programme, or corresponding.

Prerequisites

  • Basic course in software engineering (including UML)
  • Ability to program in multiple programming languages (including object-oriented programming and pointers / memory management)
  • Data structures
  • The student should know how to read research papers on software engineering and search information independently on new topics.

Intended learning outcomes

After the course, students shall be able to:

  • analyze the structure and organization in a larger program
  • critically evaluate design principles and -patterns in relation to desired properties of software and interfaces
  • design a program that handles internationalization and localization
  • apply tools that help the user to refactor or generate source-code
  • apply different forms of metaprogramming
  • apply methods and tools to find different kinds of problems in source code both before and during execution of a program, for example parallel execution or memory leaks

Course content

History of design patterns. Design patterns. Refactoring. Use of integrated development environments. Code generation. Design for testability. Design of domain-specific languages. Metaprogramming. Dependency injection. Design of frameworks and API:s. Advanced debugging of memory allocation in parallel programs. Memory profiling.

Teaching and working methods

Students use online lecture material and study course literature as preparations for lab assignments in pairs and seminars in groups, where issues concerning the course literature are treated.

The lab assignments differ in scope and depth: some train students in basic skills and techniques with some guidance, whereas other assignments have students develop and analyze larger programmes with less guidance.

Examination

DAT1Computer-based exam2 creditsU, 3, 4, 5
LAB1Laboratory work3 creditsU, G
UPG1Assignment1 creditsU, G

Grades

Four-grade scale, LiU, U, 3, 4, 5

Other information

Supplementary courses

Courses in Program Architectures and Program Quality completes the course.

Department

Institutionen för datavetenskap

Director of Studies or equivalent

Ola Leifler

Examiner

Martin Sjölund

Course website and other links

http://www.ida.liu.se/~KURSKOD

Education components

Preliminary scheduled hours: 40 h
Recommended self-study hours: 120 h

Course literature

Books

  • Freeman & Freeman, Head First Design Patterns
  • Gamma, Helm, et.al., (1995) Design Patterns: Elements of Object-Oriented Software Addison Wesley

Other

  • Selected articles on software design and design patterns.

Code Name Scope Grading scale
DAT1 Computer-based exam 2 credits U, 3, 4, 5
LAB1 Laboratory work 3 credits U, G
UPG1 Assignment 1 credits U, G

Course syllabus

A syllabus has been established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.

Timetabling

Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. A central timetable is not drawn up for courses with fewer than five participants. Most project courses do not have a central timetable.

Interrupting a course

The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: www.lith.liu.se/for-studenter/kurskomplettering?l=sv. 

Cancelled courses

Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The board of studies is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. 

Regulations relating to examinations and examiners 

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.

Forms of examination

Examination

Written and oral examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.

Principles for examination scheduling for courses that follow the study periods:

  • courses given in VT1 are examined for the first time in March, with re-examination in June and August
  • courses given in VT2 are examined for the first time in May, with re-examination in August and October
  • courses given in HT1 are examined for the first time in October, with re-examination in January and August
  • courses given in HT2 are examined for the first time in January, with re-examination at Easter and in August.

The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2). 

  • Examinations for courses that the board of studies has decided are to be held in alternate years are held only three times during the year in which the course is given.
  • Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
  • If teaching is no longer given for a course, three examination occurrences are held during the immediately subsequent year, while examinations are at the same time held for any replacement course that is given, or alternatively in association with other re-examination opportunities. Furthermore, an examination is held on one further occasion during the next subsequent year, unless the board of studies determines otherwise.
  • If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.

Registration for examination

In order to take an examination, a student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.

Symbols used in the examination registration system:

  ** denotes that the examination is being given for the penultimate time.

  * denotes that the examination is being given for the last time.

Code of conduct for students during examinations

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.

Retakes for higher grade

Students at the Institute of Technology at LiU have the right to retake written examinations and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.

Retakes of other forms of examination

Regulations concerning retakes of other forms of examination than written examinations and computer-based examinations are given in the LiU regulations for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.

Plagiarism

For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations.

A failure to specify such sources may be regarded as attempted deception during examination.

Attempts to cheat

In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=sv.

Grades

The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). Courses under the auspices of the faculty board of the Faculty of Science and Engineering (Institute of Technology) are to be given special attention in this regard.

  1. Grades U, 3, 4, 5 are to be awarded for courses that have written examinations.
  2. Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.

Examination components

  1. Grades U, 3, 4, 5 are to be awarded for written examinations (TEN).
  2. Grades Fail (U) and Pass (G) are to be used for undergraduate projects and other independent work.
  3. Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
  4. Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as other examination (ANN), tutorial group (BAS) or examination item (MOM).

The examination results for a student are reported at the relevant department.

Regulations (apply to LiU in its entirety)

The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.

LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva. 

Books

Freeman & Freeman, Head First Design Patterns
Gamma, Helm, et.al., (1995) Design Patterns: Elements of Object-Oriented Software Addison Wesley

Other

Selected articles on software design and design patterns.

Note: The course matrix might contain more information in Swedish.

I = Introduce, U = Teach, A = Utilize
I U A Modules Comment
1. DISCIPLINARY KNOWLEDGE AND REASONING
1.1 Knowledge of underlying mathematics and science (G1X level)
X

                            
1.2 Fundamental engineering knowledge (G1X level)
X
LAB1
Knowledge in for example object-oriented programming and software engineering is used.
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level)
X
X
DAT1
LAB1
UPG1
For example, design patterns and metaprogramming is taught and used.
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level)

                            
1.5 Insight into current research and development work

                            
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES
2.1 Analytical reasoning and problem solving
X
LAB1
Systematic methods which help with labs
2.2 Experimentation, investigation, and knowledge discovery
X
LAB1
Labs contain assignments without comprehensive instructions
2.3 System thinking
X
LAB1
Systematically analyze problems
2.4 Attitudes, thought, and learning
X
UPG1
Analysis of a larger software project and understanding of source code
2.5 Ethics, equity, and other responsibilities
X
LAB1
Handling a larger software project
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION
3.1 Teamwork
X
LAB1
Labs in groups of two students
3.2 Communications
X
LAB1
Written and oral examination of labs.
Discussion during seminars.
3.3 Communication in foreign languages
X
X
LAB1
English is used, but is not a foreign language for all students. Some knowledge of foreign languages and cultures is taught during the labs in internationalization (i11n) / localization (L10n) of software.
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT
4.1 External, societal, and environmental context
X
X
DAT1
LAB1
Some knowledge of foreign languages and cultures is taught during the labs in internationalization (i11n) / localization (L10n) of software.
4.2 Enterprise and business context
X
Costs of software development
4.3 Conceiving, system engineering and management
X
DAT1
LAB1
UPG1
Software design
4.4 Designing
X
DAT1
LAB1
Object-oriented programming, GUI-programming, etc
4.5 Implementing
X
DAT1
LAB1
Debugging, performance analysis
4.6 Operating

                            
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development

                            
5.2 Economic conditions for knowledge development

                            
5.3 Identification of needs, structuring and planning of research or development projects

                            
5.4 Execution of research or development projects

                            
5.5 Presentation and evaluation of research or development projects

                            

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.

There are no files available for this course.