Main field of studyIndustrial Engineering and Management Logistics
Course typeProgramme course
Director of studies or equivalentUni Sallnäs
Main field of studyIndustrial Engineering and Management, Logistics
Course levelSecond cycle
Course offered for
- Design and Product Development
- Energy-Environment-Management M Sc in Engineering
- Industrial Engineering and Management - International, M Sc in Engineering
- Industrial Engineering and Management, M Sc in Engineering
- Mechanical Engineering, M Sc in Engineering
Note: Admission requirements for non-programme students usually also include admission requirements for the programme and threshold requirements for progression within the programme, or corresponding.
Intended learning outcomes
The aim of the course is to contribute with theoretical knowledge concerning logistics in supply chains and to increase the ability to make a structural analysis of alternative logistics solutions. The analysis is inter-organisational, in terms of covering several actors´ perspective in a supply chain, as well as intra-organisational, in terms of the interplay between the logistics function and other functions in a company. After having completed the course the student should:
- Have knowledge about theoretical terms as e.g. supply chain management, centralisation, flexibility, uncertainties, coordination, integration and these terms´ relevance in logistics.
- Be able to understand how different contextual factors in a supply chain affect the logistics design, e.g. typ of industry, marketing channel, corporate strategies and logistics strategies.
- Be able to perform a qualitative and quantitative analysis of different logistics alternatives for a company and a supply chain respectively. The analysis concerns physical structure, division of roles, logistics activities, physical flows and information flows, and is evaluated in terms of their economic effects.
- Be able to make an analysis of logistics tasks by:
- Assessing the tasks and make relevant delimitations
- make relevant assumptions and simplifications of the tasks
- evaluating different alternative solutions with regard to uncertainties
- clearly communicate and motivate results
The course primarily covers inter-organizational issues concerning logistics between companies in a supply chain, e.g. the physical flow from suppliers to manufacturers, wholesalers, retailers and their industrial end customers. Also intra-organizational issues is an important part of the course, e.g. inbound and outbound logistics and the relations with functions such as purchasing, manufacturing, and marketing/sales.
An important part of the course is to learn how to make a structured analysis of alternative logistics solutions for different companies in a supply chain. The analysis concerns physical structure, the division of roles between actors, logistics activities, physical flows and information flows. Another important part of the course is coordination between companies in the supply chain and between functions in the companies. Issues like collaboration and division of roles are discussed, e.g. vendor managed inventory. The analysis concerns evaluation of costs, time, service, sales, competitiveness, and other intangible effects connected to logistics as a value creator.
Teaching and working methods
Lectures, seminars and laborations.
|UPG1||Assignments||U, G||4 credits|
|KTR1||Written test||U, G||2 credits|
GradesFour-grade scale, LiU, U, 3, 4, 5
Logistics Analysis, Logistics Strategies, Logistics Project, Purchasing, Sustainable Logistics Systems
DepartmentInstitutionen för ekonomisk och industriell utveckling
Director of Studies or equivalentUni Sallnäs
Education componentsPreliminary scheduled hours: 56 h
Recommended self-study hours: 104 h
|UPG1||Assignments||U, G||4 credits|
|KTR1||Written test||U, G||2 credits|
A syllabus has been established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.
Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. A central timetable is not drawn up for courses with fewer than five participants. Most project courses do not have a central timetable.
Interrupting a course
The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: www.lith.liu.se/for-studenter/kurskomplettering?l=sv.
Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The board of studies is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus.
Regulations relating to examinations and examiners
Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.
Forms of examination
Written and oral examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.
Principles for examination scheduling for courses that follow the study periods:
- courses given in VT1 are examined for the first time in March, with re-examination in June and August
- courses given in VT2 are examined for the first time in May, with re-examination in August and October
- courses given in HT1 are examined for the first time in October, with re-examination in January and August
- courses given in HT2 are examined for the first time in January, with re-examination at Easter and in August.
The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2).
- Examinations for courses that the board of studies has decided are to be held in alternate years are held only three times during the year in which the course is given.
- Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
- If teaching is no longer given for a course, three examination occurrences are held during the immediately subsequent year, while examinations are at the same time held for any replacement course that is given, or alternatively in association with other re-examination opportunities. Furthermore, an examination is held on one further occasion during the next subsequent year, unless the board of studies determines otherwise.
- If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.
Registration for examination
In order to take an examination, a student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.
Symbols used in the examination registration system:
** denotes that the examination is being given for the penultimate time.
* denotes that the examination is being given for the last time.
Code of conduct for students during examinations
Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.
Retakes for higher grade
Students at the Institute of Technology at LiU have the right to retake written examinations and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.
Retakes of other forms of examination
Regulations concerning retakes of other forms of examination than written examinations and computer-based examinations are given in the LiU regulations for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.
For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations.
A failure to specify such sources may be regarded as attempted deception during examination.
Attempts to cheat
In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=sv.
The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). Courses under the auspices of the faculty board of the Faculty of Science and Engineering (Institute of Technology) are to be given special attention in this regard.
- Grades U, 3, 4, 5 are to be awarded for courses that have written examinations.
- Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
- Grades U, 3, 4, 5 are to be awarded for written examinations (TEN).
- Grades Fail (U) and Pass (G) are to be used for undergraduate projects and other independent work.
- Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
- Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as other examination (ANN), tutorial group (BAS) or examination item (MOM).
The examination results for a student are reported at the relevant department.
Regulations (apply to LiU in its entirety)
The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.
LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva.
This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page. There are no files available for this course.