Surfaces and Interfaces, 6 credits

Ytor och gränsskikt, 6 hp

TFYA47

Main field of study

Engineering Biology Applied Physics Physics

Course level

Second cycle

Course type

Programme course

Examiner

Thomas Ederth

Director of studies or equivalent

Magnus Boman

Education components

Preliminary scheduled hours: 48 h
Recommended self-study hours: 112 h

Available for exchange students

Yes
ECV = Elective / Compulsory / Voluntary
Course offered for Semester Period Timetable module Language Campus ECV
6CMED Biomedical Engineering, Master of Science in Engineering 9 (Autumn 2024) 1 2 Swedish/English Linköping, Valla E
6CMED Biomedical Engineering, Master of Science in Engineering (Biomedical Engineering Materials) 9 (Autumn 2024) 1 2 Swedish/English Linköping, Valla C
6CKEB Chemical Biology, Master of Science in Engineering (Industrial Bioprocesses) 7 (Autumn 2024) 1 2 Swedish/English Linköping, Valla E
6CKEB Chemical Biology, Master of Science in Engineering (Industrial Bioprocesses) 9 (Autumn 2024) 1 2 Swedish/English Linköping, Valla E
6CTBI Engineering Biology, Master of Science in Engineering (Devices and Materials in Biomedicine) 7 (Autumn 2024) 1 2 Swedish/English Linköping, Valla C
6CTBI Engineering Biology, Master of Science in Engineering (Industrial Bioprocesses) 7 (Autumn 2024) 1 2 Swedish/English Linköping, Valla E
6CTBI Engineering Biology, Master of Science in Engineering (Industrial Bioprocesses) 9 (Autumn 2024) 1 2 Swedish/English Linköping, Valla E

Main field of study

Engineering Biology, Applied Physics, Physics

Course level

Second cycle

Advancement level

A1X

Course offered for

  • Master of Science in Biomedical Engineering
  • Master of Science in Chemical Biology
  • Master of Science in Engineering Biology

Prerequisites

Basic knowledge of calculus in many variables, probability and statistics, classical physics, general chemistry, physical chemistry and quantum mechanics.

Intended learning outcomes

The course gives a general introduction to surfaces; their structure and physical-chemical properties, and interfaces between solids and organic materials or liquids. This includes hard surfaces (crystalline and amorphous), soft matter surfaces (polymers and molecular films), free liquid surfaces and their interfaces, and colloidal systems. The course introduces analytical techniques for studies of surfaces, interfaces,  thin films and colloids. After the course the student should be able to:

  • Understand and describe properties of free liquid surfaces, such as surface tension, capillarity, wetting and spreading.
  • Understand and describe electrical phenomena at surfaces, such as surface charge, surface potential, the electrical double layer, and basic electrochemical concepts.
  • Describe the phase behaviour and aggregation of amphiphiles in solution and at interfaces.
  • Desribe intermolecular forces, forces acting between molecules and surfaces, and surface forces.
  • Describe common crystal structures of solid materials and understand the arrangement of atoms in surfaces made from such crystals.
  • Describe the mechanisms that control the formation of overlayer structures on single crystal surfaces and classify such overlayer structures.
  • Describe the shape and properties of common adsorption isoterms, and apply them for extraction of termodynamic or physicochemical data.
  • Desribe the function and principles for common methods and instruments for surface and thin film analysis, as well as explain and interpret the information that can be obtained from these techniques.
  • Desribe methods for the preparation and characterization of thin organic films on surfaces, in particular self-assembled monolayers.
  • Describe and understand fundamental properties of colloidal systems, and methods for studies of such systems.

Course content

Surface phases, surface energy, surface tension, surface excess. Free liquid surfaces, capillarity, Laplace' and Kelvin's equations. Wetting, contact angles, Young's equation. Surface charge, electrical double layer, Zeta potential. Amphiphilic aggregation and phase behaviour. Adsorption to liquid interfaces, Gibb's isotherm. Forces between molecules and between molecular systems and surfaces. Colloids and colloidal stability. The structure and properties of molecular films; preparation strategies, thermodynamically and kinetically controlled processes, surface modification, self-assembled monolayers.
Hard materials and surfaces, the structure of surfaces, the surface chemical bond, physisorption, chemisorption. Adsorption, adsorption kinetics and isotherms, surface reactions. Analytical methods for analysis of surfaces, interfaces and colloids.

Teaching and working methods

The material is presented in lectures, as well as classroom and laboratory exercises.

Examination

LAB1Laboratory course1.5 creditsU, G
TEN2Written examination4.5 creditsU, 3, 4, 5

Grades

Four-grade scale, LiU, U, 3, 4, 5

Other information

Supplementary courses: Surface science, Biosensor technology, Microsystems and Nanobiology, Biomedical materials.

About teaching and examination language

The teaching language is presented in the Overview tab for each course. The examination language relates to the teaching language as follows: 

  • If teaching language is “Swedish”, the course as a whole could be given in Swedish, or partly in English. Examination language is Swedish, but parts of the examination can be in English.
  • If teaching language is “English”, the course as a whole is taught in English. Examination language is English.
  • If teaching language is “Swedish/English”, the course as a whole will be taught in English if students without prior knowledge of the Swedish language participate. Examination language is Swedish or English depending on teaching language.

Other

The course is conducted in such a way that there are equal opportunities with regard to sex, transgender identity or expression, ethnicity, religion or other belief, disability, sexual orientation and age.

The planning and implementation of a course should correspond to the course syllabus. The course evaluation should therefore be conducted with the course syllabus as a starting point. 

The course is campus-based at the location specified for the course, unless otherwise stated under “Teaching and working methods”. Please note, in a campus-based course occasional remote sessions could be included.  

Department

Institutionen för fysik, kemi och biologi

Course literature

Books

  • Attard, Gary, Barnes, Colin, (1998) Surfaces Oxford : Oxford University Press, 1998
    ISBN: 0198556861, 9780198556862
  • Barnes, Geoffrey, Gentle, Ian, (2011) Interfacial science : an introduction 2nd ed. Oxford : Oxford University Press, c2011
    ISBN: 9780199571185, 019957118x

Other

  • Course literature

    The literature consists of the two books listed below, and additional material on electrochemistry and cyclic voltammetry, which is available from the course webpage under "Lab exercises".

    • G.T. Barnes & I.R. Gentle, Interfacial science: An introduction, 2nd ed., Oxford University Press 2011, ISBN 9780199571185.
    • G. Attard & C. Barnes, Surfaces, Oxford University Press 1998, ISBN 9780198556862.
       

    Other literature

    As far as I am aware, there are no single books covering the whole course contents, but here is one which almost does, and which could be good alternative reading:

    • H.-J. Butt, K. Graf, M. Kappl, Physics and Chemistry of Interfaces, 3 uppl., Wiley-VCH 2013, ISBN 9783527412167.

    Other literature for further reading:

    • J.C. Berg, An Introduction to Interfaces and Colloids, World Scientific 2009, ISBN 9789814299824 (emphasis on surface and colloid chemistry, liquid interfaces).
    • J.N. Israelachvili, Intermolecular and surface forces, 3 uppl., Academic Press, 2011, ISBN 9780123751829 (stand literature on intermolecular and surface forces).
    • A.W. Adamson and A.P. Gast, Physical chemistry of surfaces, 6 uppl., Wiley 1997, ISBN 0471148733 (A classic in the field, with both fundamentals and applications).
    • H.Y. Erbil, Surface Chemistry of Solid and Liquid Interfaces, John Wiley & Sons 2006, ISBN 9781405119689 (some emphasis on thermodynamic aspects).
Code Name Scope Grading scale
LAB1 Laboratory course 1.5 credits U, G
TEN2 Written examination 4.5 credits U, 3, 4, 5

Course syllabus

A syllabus must be established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.

Timetabling

Program courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. Single subject courses can be timetabled at other times.

Interruption in and deregistration from a course

The LiU decision, Guidelines concerning confirmation of participation in education, Dnr LiU-2020-02256 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/764582), states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered are therefore obliged to report the interruption so that this can be noted in Ladok. Deregistration from or interrupting a course is carried out using a Web-based form.

Cancelled courses and changes to the course syllabus

Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The Dean is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. For single subject courses, the cancellation must be done before students are admitted to the course (in accordance with LiUs regulation Dnr LiU-2022-01200, https://styrdokument.liu.se/Regelsamling/VisaBeslut/622645).

Guidelines relating to examinations and examiners 

For details, see Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2023-00379  (http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).

An examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments, Dnr LiU-2022-04445 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). For courses in second-cycle, the following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. For courses in first-cycle, Assistant Lecturer (including Adjunct and Visiting Assistant Lecturer) can also be appointed as examiner in addition to those listed for second-cycle courses. In exceptional cases, a Part-time Lecturer can also be appointed as an examiner at both first- and second cycle, see Delegation of authority for the Board of Faculty of Science and Engineering.

Forms of examination

Principles for examination

Written and oral examinations and digital and computer-based examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the faculty programme board.

Principles for examination scheduling for courses that follow the study periods:

  • courses given in VT1 are examined for the first time in March, with re-examination in June and August
  • courses given in VT2 are examined for the first time in May, with re-examination in August and January
  • courses given in HT1 are examined for the first time in October, with re-examination in January and August
  • courses given in HT2 are examined for the first time in January, with re-examination in March and in August.

The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2). 

Examinations for courses that the faculty programme board has decided are to be held in alternate years are held three times during the school year in which the course is given according to the principles stated above.

Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.

When a course, or a written or oral examination (TEN, DIT, DAT, MUN), is given for the last time, the regular examination and two re-examinations will be offered. Thereafter, examinations are phased out by offering three examinations during the following academic year at the same times as the examinations in any substitute course. If there is no substitute course, three examinations will be offered during re-examination periods during the following academic year. Other examination times are decided by the faculty programme board. In all cases above, the examination is also offered one more time during the academic year after the following, unless the faculty programme board decides otherwise. In total, 6 re-examinations are offered, of which 2 are regular re-examinations. In the examination registration system, the examinations given for the penultimate time and the last time are denoted. 

If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the faculty programme board or boards determine together the scheduling and frequency of re-examination occasions.

For single subject courses, written and oral examinations can be held at other times.  

Retakes of other forms of examination

Regulations concerning retakes of other forms of examination than written examinations and digital and computer-based examinations are given in the LiU guidelines for examinations and examiners, Dnr LiU-2023-00379 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).

Course closure

For Decision on Routines for Administration of the Discontinuation of Educational Programs, Freestanding Courses and Courses in Programs, see Dnr LiU-2021-04782 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/1156410). After a decision on closure and after the end of the discontinuation period, the students are referred to a replacement course (or similar) according to information in the course syllabus or programme syllabus. If a student has passed some part/parts of a closed program course but not all, and there is an at least partially replacing course, an assessment of crediting can be made. Any crediting of course components is made by the examiner.

Registration for examination

In order to take an written, digital or computer-based examination, registration in advance is mandatory, see decision in the university’s rule book Dnr LiU-2020-04559 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622682). An unregistered student can thus not be offered a place. The registration is done at the Student Portal or in the LiU-app during the registration period. The registration period opens 30 days before the date of the examination and closes 10 days before the date of the examination. Candidates are informed of the location of the examination by email, four days in advance. 

Code of conduct for students during examinations

Details are given in a decision in the university’s rule book, Dnr LiU-2020-04559 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682).

Retakes for higher grade

Students at the Institute of Technology at LiU have the right to retake written examinations and digital and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN”, “DIT” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.

A retake is not possible on courses that are included in an issued degree diploma. 

Grades

The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). 

  • Grades U, 3, 4, 5 are to be awarded for courses that have written or digital examinations.
  • Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
  • Grades Fail (U) and Pass (G) are to be used for degree projects and other independent work.

Examination components

The following examination components and associated module codes are used at the Faculty of Science and Engineering:

  • Grades U, 3, 4, 5 are to be awarded for written examinations (TEN) and digital examinations (DIT).
  • Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), digital preparatory written examination (DIK), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
  • Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as tutorial group (BAS) or examination item (MOM).
  • Grades Fail (U) and Pass (G) are to be used for the examination components Opposition (OPPO) and Attendance at thesis presentation (AUSK) (i.e. part of the degree project).

In general, the following applies:

  • Mandatory course components must be scored and given a module code.
  • Examination components that are not scored, cannot be mandatory. Hence, it is voluntary to participate in these examinations, and the voluntariness must be clearly stated. Additionally, if there are any associated conditions to the examination component, these must be clearly stated as well.
  • For courses with more than one examination component with grades U,3,4,5, it shall be clearly stated how the final grade is weighted.

For mandatory components, the following applies (in accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2023-00379 http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592): 

  • If special circumstances prevail, and if it is possible with consideration of the nature of the compulsory component, the examiner may decide to replace the compulsory component with another equivalent component.

For possibilities to alternative forms of examinations, the following applies (in accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2023-00379 http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592): 

  • If the LiU coordinator for students with disabilities has granted a student the right to an adapted examination for a written examination in an examination hall, the student has the right to it.
  • If the coordinator has recommended for the student an adapted examination or alternative form of examination, the examiner may grant this if the examiner assesses that it is possible, based on consideration of the course objectives.
  • An examiner may also decide that an adapted examination or alternative form of examination if the examiner assessed that special circumstances prevail, and the examiner assesses that it is possible while maintaing the objectives of the course.

Reporting of examination results

The examination results for a student are reported at the relevant department.

Plagiarism

For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as degree projects, project reports, etc. (this is sometimes known as “self-plagiarism”).

A failure to specify such sources may be regarded as attempted deception during examination.

Attempts to cheat

In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at Cheating, deception and plagiarism.

Linköping University has also produced a guide for teachers and students' use of generative AI in education (Dnr LiU-2023-02660). As a student, you are always expected to gain knowledge of what applies to each course (including the degree project). In general, clarity to where and how generative AI has been used is important.  

Regulations (apply to LiU in its entirety)

The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.

LiU’s rule book for education at first-cycle and second-cycle levels is available at https://styrdokument.liu.se/Regelsamling/Innehall

Books

Attard, Gary, Barnes, Colin, (1998) Surfaces Oxford : Oxford University Press, 1998

ISBN: 0198556861, 9780198556862

Barnes, Geoffrey, Gentle, Ian, (2011) Interfacial science : an introduction 2nd ed. Oxford : Oxford University Press, c2011

ISBN: 9780199571185, 019957118x

Other

Course literature

The literature consists of the two books listed below, and additional material on electrochemistry and cyclic voltammetry, which is available from the course webpage under "Lab exercises".

  • G.T. Barnes & I.R. Gentle, Interfacial science: An introduction, 2nd ed., Oxford University Press 2011, ISBN 9780199571185.
  • G. Attard & C. Barnes, Surfaces, Oxford University Press 1998, ISBN 9780198556862.
     

Other literature

As far as I am aware, there are no single books covering the whole course contents, but here is one which almost does, and which could be good alternative reading:

  • H.-J. Butt, K. Graf, M. Kappl, Physics and Chemistry of Interfaces, 3 uppl., Wiley-VCH 2013, ISBN 9783527412167.

Other literature for further reading:

  • J.C. Berg, An Introduction to Interfaces and Colloids, World Scientific 2009, ISBN 9789814299824 (emphasis on surface and colloid chemistry, liquid interfaces).
  • J.N. Israelachvili, Intermolecular and surface forces, 3 uppl., Academic Press, 2011, ISBN 9780123751829 (stand literature on intermolecular and surface forces).
  • A.W. Adamson and A.P. Gast, Physical chemistry of surfaces, 6 uppl., Wiley 1997, ISBN 0471148733 (A classic in the field, with both fundamentals and applications).
  • H.Y. Erbil, Surface Chemistry of Solid and Liquid Interfaces, John Wiley & Sons 2006, ISBN 9781405119689 (some emphasis on thermodynamic aspects).

Note: The course matrix might contain more information in Swedish.

I = Introduce, U = Teach, A = Utilize
I U A Modules Comment
1. DISCIPLINARY KNOWLEDGE AND REASONING
1.1 Knowledge of underlying mathematics and science (G1X level)
X
X
LAB1
TEN2
U: Surface chemistry and physics, A: Calculus, statistics, classical physics, general chemistry
1.2 Fundamental engineering knowledge (G1X level)
X
LAB1
TEN2
U: Engineering applications in surface science
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level)
X
LAB1
TEN2
U: Surface chemistry and surface physics
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level)
X
LAB1
TEN2
U: Surface chemistry and its applications in soft matter
1.5 Insight into current research and development work
X
I: Methods which are commonly used in industry and research. Current research topics and industrial applications.
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES
2.1 Analytical reasoning and problem solving
X
X
LAB1
TEN2
Problem solving, in class and in lab exercises
2.2 Experimentation, investigation, and knowledge discovery
X
X
LAB1
Using new concepts via problem solving, laboratory exercises
2.3 System thinking
X
TEN2
Applications in engineering systems
2.4 Attitudes, thought, and learning
X
LAB1
TEN2
Problem solving, laboratory exercises
2.5 Ethics, equity, and other responsibilities

                            
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION
3.1 Teamwork
X
X
LAB1
Group laboratory exercises
3.2 Communications
X
X
LAB1
Lab reports
3.3 Communication in foreign languages
X
LAB1
Teaching in English, lab report in English, course literature in English
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT
4.1 External, societal, and environmental context
X
X
TEN2
Basic knowledge as tools for understanding and solving problems in environmental and climate sciences, etc.
4.2 Enterprise and business context

                            
4.3 Conceiving, system engineering and management

                            
4.4 Designing

                            
4.5 Implementing

                            
4.6 Operating

                            
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development

                            
5.2 Economic conditions for knowledge development

                            
5.3 Identification of needs, structuring and planning of research or development projects

                            
5.4 Execution of research or development projects

                            
5.5 Presentation and evaluation of research or development projects

                            

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.

There are no files available for this course.