Main field of studyEnergy and Environmental Engineering Product Development Mechanical Engineering
Course typeProgramme course
Director of studies or equivalentCarina Sundberg
|Course offered for||Semester||Period||Timetable module||Language||Campus||VOF|
|6KFTL||Air Transportation and Logistics, Bachelor's Programme||6 (Spring 2022)||1||2||Swedish||Norrköping||v|
|6KLOG||Civic Logistics, Bachelor's Programme||6 (Spring 2022)||1||2||Swedish||Norrköping||v|
|6CIEN||Electronics Design Engineering, Master of Science in Engineering||4 (Spring 2022)||1||2||Swedish||Norrköping||v|
|6CMMM||Mechanical Engineering, Master of Science in Engineering||4 (Spring 2022)||2||4||Swedish||Linköping||o|
|6IBYG||Civil Engineering, Bachelor of Science in Engineering||4 (Spring 2022)||1||2||Swedish||Norrköping||o|
|6KFTL||Air Transportation and Logistics, Bachelor's Programme||4 (Spring 2022)||1||2||Swedish||Norrköping||v|
Main field of studyEnergy and Environmental Engineering, Product Development, Mechanical Engineering
Course levelFirst cycle
Course offered for
- Bachelor's Programme in Air Transportation and Logistics
- Bachelor's Programme in Civic Logistics
- Master of Science in Electronics Design Engineering
- Master of Science in Mechanical Engineering
- Bachelor of Science in Civil Engineering
- Master of Science in Chemical Biology
- Master of Science in Engineering Biology
- Master of Science in Computer Science and Engineering
- Master of Science in Information Technology
- Master of Science in Biomedical Engineering
- Master of Science in Computer Science and Software Engineering
- Master of Science in Applied Physics and Electrical Engineering
- Master of Science in Applied Physics and Electrical Engineering - International
- Bachelor of Science in Engineering Electronics
- Bachelor of Science in Chemical Analysis Engineering
- Master of Science in Design and Product Development
- Master's Programme in Mathematics
- Master of Science in Energy - Environment - Management
PrerequisitesAt least one year study of engineering. Basic knowledge of chemistry.
Intended learning outcomes
This course aims to contribute to knowledge and awareness about emergence of environmental problems and possible solutions of these problems. Focus is on the role of the engineer in proactive work to decrease environmental impact in relation to societal flows of material and energy. After successful completion of the course the student shall:
- Be able to describe the important environmental problems that has been presented during the course, and on an overall level, be able to describe the environmental and health effects these problems are causing,
- On an overall level, be able to describe the development within the environmental field, historically and today, and clarify how probable future scenarios concerning population growth and other societal development might affect the situation,
- Be able to apply the above mentioned knowledge by solving reality based case studies,
- Especially for important technical systems, be able to explain how they affect the environment, and through critical evaluation, explain how they can be adapted to reduce the environmental impact.
- Be able to describe central parts and characteristics of modern corporate environmental management.
- Be able to compile, present, and criticize a product report from a life cycle perspective,
Emergence of and scientific background to environmental problems; sustainable development; environmental issues in relation to technical systems; technical, economical and political measures to solve environmental problems. The role of the engineer concerning the environment and sustainable development.
Teaching and working methods
Lectures and assignments.
|UPG2||Approved assignment||U, G||2 credits|
|TEN1||A Written Examination||U, 3, 4, 5||4 credits|
GradesFour-grade scale, LiU, U, 3, 4, 5
Supplementary courses: Miljömanagement, Industrial Ecology, Resource efficient Products
DepartmentInstitutionen för ekonomisk och industriell utveckling
Director of Studies or equivalentCarina Sundberg
Education componentsPreliminär schemalagd tid: 45 h
Rekommenderad självstudietid: 115 h
BöckerJ. Ammenberg och O. Hjelm. (Redaktör), (2013) Miljöteknik - för en hållbar utveckling. Studentlitteratur
|UPG2||Approved assignment||U, G||2 credits|
|TEN1||A Written Examination||U, 3, 4, 5||4 credits|
A syllabus must be established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.
Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module.
Interruption in and deregistration from a course
The LiU decision, Guidelines concerning confirmation of participation in education (Dnr LiU-2020-02256), states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from or interrupting a course is carried out using a web-based form: https://www.lith.liu.se/for-studenter/kurskomplettering?l=en.
Cancelled courses and changes to the course syllabus
Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The Dean is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus.
Guidelines relating to examinations and examiners
For details, see Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2020-04501 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).
An examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments, Dnr LiU-2021-01204 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). For courses in second-cycle, the following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. For courses in first-cycle, Assistant Lecturer (including Adjunct and Visiting Assistant Lecturer) can also be appointed as examiner in addition to those listed for second-cycle courses. In exceptional cases, a Part-time Lecturer can also be appointed as an examiner at both first- and second cycle, see Delegation of authority for the Board of Faculty of Science and Engineering.
Forms of examination
Principles for examination
Written and oral examinations and digital and computer-based examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.
Principles for examination scheduling for courses that follow the study periods:
- courses given in VT1 are examined for the first time in March, with re-examination in June and August
- courses given in VT2 are examined for the first time in May, with re-examination in August and October
- courses given in HT1 are examined for the first time in October, with re-examination in January and August
- courses given in HT2 are examined for the first time in January, with re-examination in March and in August.
The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2).
Examinations for courses that the board of studies has decided are to be held in alternate years are held three times during the school year in which the course is given according to the principles stated above.
Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
When a course is given for the last time, the regular examination and two re-examinations will be offered. Thereafter, examinations are phased out by offering three examinations during the following academic year at the same times as the examinations in any substitute course. If there is no substitute course, three examinations will be offered during re-examination periods during the following academic year. Other examination times are decided by the board of studies. In all cases above, the examination is also offered one more time during the academic year after the following, unless the board of studies decides otherwise. In total, 6 re-examinations are offered, of which 2 are regular re-examinations. In the examination registration system, the examinations given for the penultimate time and the last time are denoted.
If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.
Retakes of other forms of examination
Regulations concerning retakes of other forms of examination than written examinations and digital and computer-based examinations are given in the LiU guidelines for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592.
Registration for examination
In order to take an written, digital or computer-based examination, registration in advance is mandatory, see decision in the university’s rule book https://styrdokument.liu.se/Regelsamling/VisaBeslut/622682. An unregistered student can thus not be offered a place. The registration is done at the Student Portal or in the LiU-app during the registration period. The registration period opens 30 days before the date of the examination and closes 10 days before the date of the examination. Candidates are informed of the location of the examination by email, four days in advance.
Code of conduct for students during examinations
Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.
Retakes for higher grade
Students at the Institute of Technology at LiU have the right to retake written examinations and digital and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN”, “DIT” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.
A retake is not possible on courses that are included in an issued degree diploma.
The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5).
- Grades U, 3, 4, 5 are to be awarded for courses that have written or digital examinations.
- Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
- Grades Fail (U) and Pass (G) are to be used for degree projects and other independent work.
The following examination components and associated module codes are used at the Faculty of Science and Engineering:
- Grades U, 3, 4, 5 are to be awarded for written examinations (TEN) and digital examinations (DIT).
- Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), digital preparatory written examination (DIK), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
- Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as tutorial group (BAS) or examination item (MOM).
- Grades Fail (U) and Pass (G) are to be used for the examination components Opposition (OPPO) and Attendance at thesis presentation (AUSK) (i.e. part of the degree project).
In general, the following applies:
- Mandatory course components must be scored and given a module code.
- Examination components that are not scored, cannot be mandatory. Hence, it is voluntary to participate in these examinations, and the voluntariness must be clearly stated. Additionally, if there are any associated conditions to the examination component, these must be clearly stated as well.
- For courses with more than one examination component with grades U,3,4,5, it shall be clearly stated how the final grade is weighted.
For mandatory components, the following applies (in accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592):
- If special circumstances prevail, and if it is possible with consideration of the nature of the compulsory component, the examiner may decide to replace the compulsory component with another equivalent component.
For possibilities to alternative forms of examinations, the following applies (in accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592):
- If the LiU coordinator for students with disabilities has granted a student the right to an adapted examination for a written examination in an examination hall, the student has the right to it.
- If the coordinator has recommended for the student an adapted examination or alternative form of examination, the examiner may grant this if the examiner assesses that it is possible, based on consideration of the course objectives.
- An examiner may also decide that an adapted examination or alternative form of examination if the examiner assessed that special circumstances prevail, and the examiner assesses that it is possible while maintaing the objectives of the course.
Reporting of examination results
The examination results for a student are reported at the relevant department.
For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as degree projects, project reports, etc. (this is sometimes known as “self-plagiarism”).
A failure to specify such sources may be regarded as attempted deception during examination.
Attempts to cheat
In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=en.
Regulations (apply to LiU in its entirety)
The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.
LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva.
This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page. There are no files available for this course.