Corporate Sustainability Management, 6 credits

Hållbar utveckling och företagande, 6 hp

TKMJ51

Main field of study

Energy and Environmental Engineering Industrial Engineering and Management

Course level

First cycle

Course type

Programme course

Examiner

Pontus Cerin

Director of studies or equivalent

Carina Sundberg

Education components

Preliminary scheduled hours: 38 h
Recommended self-study hours: 122 h
ECV = Elective / Compulsory / Voluntary
Course offered for Semester Period Timetable module Language Campus ECV
6CIEI Industrial Engineering and Management - International, Master of Science in Engineering, Chinese 3 (Autumn 2020) 1 2 Swedish Linköping, Valla C
6CIEI Industrial Engineering and Management - International, Master of Science in Engineering, French 3 (Autumn 2020) 1 2 Swedish Linköping, Valla C
6CIEI Industrial Engineering and Management - International, Master of Science in Engineering, German 3 (Autumn 2020) 1 2 Swedish Linköping, Valla C
6CIEI Industrial Engineering and Management - International, Master of Science in Engineering, Japanese 3 (Autumn 2020) 1 2 Swedish Linköping, Valla C
6CIEI Industrial Engineering and Management - International, Master of Science in Engineering, Spanish 3 (Autumn 2020) 1 2 Swedish Linköping, Valla C
6CIII Industrial Engineering and Management, Master of Science in Engineering 3 (Autumn 2020) 1 2 Swedish Linköping, Valla C

Main field of study

Energy and Environmental Engineering, Industrial Engineering and Management

Course level

First cycle

Advancement level

G1F

Course offered for

  • Master of Science in Industrial Engineering and Management - International
  • Master of Science in Industrial Engineering and Management

Specific information

May not be included in the same degree as TKMJ15, TKMJ24 or TKMJ28.

Prerequisites

General technical/engineering knowledge from the first year at an institute of technology, and chemistry at high school level.

Intended learning outcomes

Students shall develop knowledge of corporate sustainability management, focusing on companies but also including public organizations. The course deals with important societal conditions that affect sustainability issues and how they should be managed. A main aim is to gain knowledge about strategies and tools that are important concerning sustainability management. After having completed this course, the student shall be able to:

  • Describe essential sustainability challenges that have been presented during the course; their causes, effects, and on an overall level how they have developed over time and plausible/possible future scenarios,
  • Apply the above mentioned knowledge by solving reality based case studies, focusing on environmental problems, technical systems and organizations,
  • Describe important strategies, concepts, methods and other ‘components’ of organizations’ sustainability management, clarify how they are related to one another, and motivate why they are important from a company and societal perspective,
  • Describe sustainability management as mentioned above, but also how the design and appliance of the components affect the effectiveness and efficiency of the sustainability work - especially for common components of corporate sustainability management systems,
  • Describe important requirements, drivers and barriers for companies’, and partially other organizations’, sustainability management, and how these can be handled,
  • Apply the knowledge above in making a critical analysis, on an overall level, of companies’/organizations’ chosen strategies and measures to manage sustainability issues, for example, considering their impact, internal and market conditions,
  • To motivate and propose relevant measures for companies/organizations concerning their sustainability management, and
  • Write about corporate sustainability management (focusing on the course content and the studied organization) in English of good quality, within the frames of a technical report applying a scientific approach. 

Course content

There are three main parts in the course:

  1. Introduction to sustainable development
  2. Corporate sustainability intelligence
  3. Corporate sustainability management

The following key words represent essential parts of the content: sustainable development; environmental problems/challenges; environmental history; technical systems and environmental challenges; sustainability and policy/legislation; environmental economics; ethics, business ethics; corporate sustainability management, corporate social responsibility (CSR); tools for sustainability management; sustainability management systems; commercial sustainability management; sustainable business models; organization, learning and development.

Teaching and working methods

A central part is focused on an overview of corporate sustainability management, introducing central concepts and terms. For this purpose, lectures and literature are essential. There are two mandatory assignments, as a complement, to foster student activity and application. These assignments are carried out in groups. The assignments include describing companies´ sustainability characteristics (UPG1) and analyzing their sustainability management (UPG2). Both assignments involve written and/or oral presentation, the second also in English. To facilitate and be able to assess the efforts, compulsory scheduled activities and tasks are included (such as seminars, supervision, presentation) and self-assessment.

Examination

UPG3Group assignment2.5 creditsU, G
TEN1Written examination3.5 creditsU, 3, 4, 5

Grades

Four-grade scale, LiU, U, 3, 4, 5

Other information

Supplementary courses:
Industrial Ecology, Resource efficient products, Biofuels for transportation, and others.

Department

Institutionen för ekonomisk och industriell utveckling

Director of Studies or equivalent

Carina Sundberg

Examiner

Pontus Cerin

Education components

Preliminary scheduled hours: 38 h
Recommended self-study hours: 122 h

Course literature

Ammenberg, J., 2012, Miljömanagement. Studentlitteratur. Lund.
Code Name Scope Grading scale
UPG3 Group assignment 2.5 credits U, G
TEN1 Written examination 3.5 credits U, 3, 4, 5

Course syllabus

A syllabus must be established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.

Timetabling

Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. 

Interrupting a course

The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: https://www.lith.liu.se/for-studenter/kurskomplettering?l=en. 

Cancelled courses

Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The Dean is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. 

Guidelines relating to examinations and examiners 

For details, see Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592.

An examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). For courses in second-cycle, the following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. For courses in first-cycle, Assistant Lecturer (including Adjunct and Visiting Assistant Lecturer) can also be appointed as examiner in addition to those listed for second-cycle courses. In exceptional cases, a Part-time Lecturer can also be appointed as an examiner at both first- and second cycle, see Delegation of authority for the Board of Faculty of Science and Engineering.

Forms of examination

Examination

Written and oral examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.

Principles for examination scheduling for courses that follow the study periods:

  • courses given in VT1 are examined for the first time in March, with re-examination in June and August
  • courses given in VT2 are examined for the first time in May, with re-examination in August and October
  • courses given in HT1 are examined for the first time in October, with re-examination in January and August
  • courses given in HT2 are examined for the first time in January, with re-examination in March and in August.

The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2). 

Examinations for courses that the board of studies has decided are to be held in alternate years are held three times during the school year in which the course is given according to the principles stated above.

Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.

When a course is given for the last time, the regular examination and two re-examinations will be offered. Thereafter, examinations are phased out by offering three examinations during the following academic year at the same times as the examinations in any substitute course. If there is no substitute course, three examinations will be offered during re-examination periods during the following academic year. Other examination times are decided by the board of studies. In all cases above, the examination is also offered one more time during the academic year after the following, unless the board of studies decides otherwise.

If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.

Registration for examination

In order to take an examination, a student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.

Symbols used in the examination registration system:

  ** denotes that the examination is being given for the penultimate time.

  * denotes that the examination is being given for the last time.

Code of conduct for students during examinations

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.

Retakes for higher grade

Students at the Institute of Technology at LiU have the right to retake written examinations and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.

A retake is not possible on courses that are included in an issued degree diploma. 

Retakes of other forms of examination

Regulations concerning retakes of other forms of examination than written examinations and computer-based examinations are given in the LiU guidelines for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592.

Plagiarism

For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as degree projects, project reports, etc. (this is sometimes known as “self-plagiarism”).

A failure to specify such sources may be regarded as attempted deception during examination.

Attempts to cheat

In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=en.

Grades

The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). 

  1. Grades U, 3, 4, 5 are to be awarded for courses that have written examinations.
  2. Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
  3. Grades Fail (U) and Pass (G) are to be used for degree projects and other independent work.

Examination components

  1. Grades U, 3, 4, 5 are to be awarded for written examinations (TEN).
  2. Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
  3. Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as other examination (ANN), tutorial group (BAS) or examination item (MOM).
  4. Grades Fail (U) and Pass (G) are to be used for the examination components Opposition (OPPO) and Attendance at thesis presentation (AUSK) (i.e. part of the degree project).

For mandatory components, the following applies: If special circumstances prevail, and if it is possible with consideration of the nature of the compulsory component, the examiner may decide to replace the compulsory component with another equivalent component. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592). 

For written examinations, the following applies: If the LiU coordinator for students with disabilities has granted a student the right to an adapted examination for a written examination in an examination hall, the student has the right to it. If the coordinator has instead recommended for the student an adapted examination or alternative form of examination, the examiner may grant this if the examiner assesses that it is possible, based on consideration of the course objectives. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).

The examination results for a student are reported at the relevant department.

Regulations (apply to LiU in its entirety)

The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.

LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva. 

Ammenberg, J., 2012, Miljömanagement. Studentlitteratur. Lund.

Note: The course matrix might contain more information in Swedish.

I = Introduce, U = Teach, A = Utilize
I U A Modules Comment
1. DISCIPLINARY KNOWLEDGE AND REASONING
1.1 Knowledge of underlying mathematics and science (G1X level)
X

                            
1.2 Fundamental engineering knowledge (G1X level)

                            
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level)

                            
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level)

                            
1.5 Insight into current research and development work

                            
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES
2.1 Analytical reasoning and problem solving

                            
2.2 Experimentation, investigation, and knowledge discovery

                            
2.3 System thinking

                            
2.4 Attitudes, thought, and learning

                            
2.5 Ethics, equity, and other responsibilities

                            
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION
3.1 Teamwork

                            
3.2 Communications

                            
3.3 Communication in foreign languages

                            
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT
4.1 External, societal, and environmental context

                            
4.2 Enterprise and business context

                            
4.3 Conceiving, system engineering and management

                            
4.4 Designing

                            
4.5 Implementing

                            
4.6 Operating

                            
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development

                            
5.2 Economic conditions for knowledge development

                            
5.3 Identification of needs, structuring and planning of research or development projects

                            
5.4 Execution of research or development projects

                            
5.5 Presentation and evaluation of research or development projects

                            

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.

There are no files available for this course.