Production System Automation, 6 credits (TMPS42)

Automation av produktionssystem, 6 hp

Main field of study

Mechanical Engineering

Level

Second cycle

Course type

Programme course

Examiner

Luis Ribeiro

Director of studies or equivalent

Mats Björkman

Available for exchange students

Yes
Course offered for Semester Period Timetable module Language Campus VOF
6MMEC Mechanical Engineering, Master's Programme 2 (Spring 2020) 1 1 English Linköping v
6MMEC Mechanical Engineering, Master's Programme (Manufacturing Engineering) 2 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Spanish (Specialization Mechanical Engineering) 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Spanish (Master Profile Manufacturing) 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Spanish 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - French (Specialization Mechanical Engineering) 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - French (Master Profile Manufacturing) 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - French 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Japanese (Specialization Mechanical Engineering) 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Japanese (Master Profile Manufacturing) 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Japanese 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - German (Specialization Mechanical Engineering) 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - German (Master Profile Manufacturing) 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - German 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Chinese (Specialization Mechanical Engineering) 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Chinese (Master Profile Manufacturing) 8 (Spring 2020) 1 1 English Linköping v
6CIEI Industrial Engineering and Management - International, M Sc in Engineering - Chinese 8 (Spring 2020) 1 1 English Linköping v
6CIII Industrial Engineering and Management, M Sc in Engineering 8 (Spring 2020) 1 1 English Linköping v
6CIII Industrial Engineering and Management, M Sc in Engineering (Mechanical Engineering Specialization) 8 (Spring 2020) 1 1 English Linköping v
6CIII Industrial Engineering and Management, M Sc in Engineering (Master Profile Manufacturing) 8 (Spring 2020) 1 1 English Linköping v
6CMMM Mechanical Engineering, M Sc in Engineering 8 (Spring 2020) 1 1 English Linköping v
6CMMM Mechanical Engineering, M Sc in Engineering (Production Engineering) 8 (Spring 2020) 1 1 English Linköping o
6CMMM Mechanical Engineering, M Sc in Engineering (Operations Management) 8 (Spring 2020) 1 1 English Linköping v

Main field of study

Mechanical Engineering

Course level

Second cycle

Advancement level

A1X

Course offered for

  • Master's Programme in Mechanical Engineering
  • Industrial Engineering and Management - International, M Sc in Engineering
  • Industrial Engineering and Management, M Sc in Engineering
  • Mechanical Engineering, M Sc in Engineering

Entry requirements

Note: Admission requirements for non-programme students usually also include admission requirements for the programme and threshold requirements for progression within the programme, or corresponding.

Prerequisites

Some basic and preliminary notions of programming.

Intended learning outcomes

The aim of the course is to provide a theoretical and practical overview on computerized manufacturing equipment focusing on system level automation.
After the course the students should be able to:

  • Explain the logic based formalism that supports the programming of industrial controllers
  • Implement basic programs for industrial controllers that are able to interpret the information collected from a set of sensors and convert that information into the corresponding actuation.
  • Implement programs that can communicate with other programs in other devices and therefore control a complex system.
  • Describe the main programming principles for large automated systems.
  • Describe the current and emerging automation and system architectures as well as their application context.

Course content

The course focuses on the principles, concepts and technologies required/used to automate current manufacturing systems containing different equipment: robots, conveyor belts, automated guided vehicles, etc.
The initial part of the course covers the basics of programmable logic controllers (PLC) programming and communication, the formal models that support them and how these relate to the most common sensors, actuators and equipment found in large automated manufacturing systems..
The following topics are covered:

  1. Boolean Algebra
  2. PLC Programming (using the IEC 61131-3)
  3. PLC communication
  4. Sensors & Actuators
  5. System architectures for automation 

Teaching and working methods

The course will consist of lectures and laboratory exercises. The lectures covering the different topics provide the supporting conceptual background that will be applied in the laboratory exercises. The laboratory exercises consolidate the knowledge acquired on the lectures by providing an “hands on” experience whereby the students programs a set of mini-factories.

Examination

TEN1Written examinationU, 3, 4, 53 credits
LAB1Laboration courseU, G3 credits

Grades

Four-grade scale, LiU, U, 3, 4, 5

Course literature

Selected Literature on the different topics provided by the examiner and freely available.

Other information

About teaching and examination language

The teaching language is presented in the Overview tab for each course. The examination language relates to the teaching language as follows: 

  • If teaching language is Swedish, the course as a whole or in large parts, is taught in Swedish. Please note that although teaching language is Swedish, parts of the course could be given in English. Examination language is Swedish. 
  • If teaching language is Swedish/English, the course as a whole will be taught in English if students without prior knowledge of the Swedish language participate. Examination language is Swedish or English (depending on teaching language). 
  • If teaching language is English, the course as a whole is taught in English. Examination language is English. 

Other

The course is conducted in a manner where both men's and women's experience and knowledge are made visible and developed. 

The planning and implementation of a course should correspond to the course syllabus. The course evaluation should therefore be conducted with the course syllabus as a starting point.  

Department

Institutionen för ekonomisk och industriell utveckling

Director of Studies or equivalent

Mats Björkman

Examiner

Luis Ribeiro

Course website and other links

Education components

Preliminär schemalagd tid: 55 h
Rekommenderad självstudietid: 105 h

Course literature

Kompendier

Selected scientific articles, lectures notes, code samples, provided by the lecturer and distributed in LISAM.

Kompletterande litteratur

Böcker
John, Karl-Heinz, Tiegelkamp, Michael, (2010) IEC 61131-3 : programming industrial automation systems : concepts and programming languages, requirements for programming systems, decision-making aids, second edition 2nd ed. Heidelberg ; New York : Springer, c2010
ISBN: 9783540677529,9783642120145,9783642120152
Övrigt

Course material developed by the course responsible (including lecture and lab materials).

Compendia

Selected scientific articles, lectures notes, code samples, provided by the lecturer and distributed in LISAM.

Additional literature

Books

John, Karl-Heinz, Tiegelkamp, Michael, (2010) IEC 61131-3 : programming industrial automation systems : concepts and programming languages, requirements for programming systems, decision-making aids, second edition 2nd ed. Heidelberg ; New York : Springer, c2010

ISBN: 9783540677529,9783642120145,9783642120152

Other

Course material developed by the course responsible (including lecture and lab materials).

TEN1 Written examination U, 3, 4, 5 3 credits
LAB1 Laboration course U, G 3 credits

Course syllabus

A syllabus must be established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.

Timetabling

Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. 

Interrupting a course

The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: https://www.lith.liu.se/for-studenter/kurskomplettering?l=en. 

Cancelled courses

Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The Dean is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. 

Guidelines relating to examinations and examiners 

For details, see Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592.

An examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). For courses in second-cycle, the following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. For courses in first-cycle, Assistant Lecturer (including Adjunct and Visiting Assistant Lecturer) can also be appointed as examiner in addition to those listed for second-cycle courses. In exceptional cases, a Part-time Lecturer can also be appointed as an examiner at both first- and second cycle, see Delegation of authority for the Board of Faculty of Science and Engineering.

Forms of examination

Examination

Written and oral examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.

Principles for examination scheduling for courses that follow the study periods:

  • courses given in VT1 are examined for the first time in March, with re-examination in June and August
  • courses given in VT2 are examined for the first time in May, with re-examination in August and October
  • courses given in HT1 are examined for the first time in October, with re-examination in January and August
  • courses given in HT2 are examined for the first time in January, with re-examination in March and in August.

The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2). 

Examinations for courses that the board of studies has decided are to be held in alternate years are held three times during the school year in which the course is given according to the principles stated above.

Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.

When a course is given for the last time, the regular examination and two re-examinations will be offered. Thereafter, examinations are phased out by offering three examinations during the following academic year at the same times as the examinations in any substitute course. If there is no substitute course, three examinations will be offered during re-examination periods during the following academic year. Other examination times are decided by the board of studies. In all cases above, the examination is also offered one more time during the academic year after the following, unless the board of studies decides otherwise.

If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.

Registration for examination

In order to take an examination, a student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.

Symbols used in the examination registration system:

  ** denotes that the examination is being given for the penultimate time.

  * denotes that the examination is being given for the last time.

Code of conduct for students during examinations

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.

Retakes for higher grade

Students at the Institute of Technology at LiU have the right to retake written examinations and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.

A retake is not possible on courses that are included in an issued degree diploma. 

Retakes of other forms of examination

Regulations concerning retakes of other forms of examination than written examinations and computer-based examinations are given in the LiU guidelines for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592.

Plagiarism

For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as degree projects, project reports, etc. (this is sometimes known as “self-plagiarism”).

A failure to specify such sources may be regarded as attempted deception during examination.

Attempts to cheat

In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=en.

Grades

The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). 

  1. Grades U, 3, 4, 5 are to be awarded for courses that have written examinations.
  2. Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
  3. Grades Fail (U) and Pass (G) are to be used for degree projects and other independent work.

Examination components

  1. Grades U, 3, 4, 5 are to be awarded for written examinations (TEN).
  2. Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
  3. Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as other examination (ANN), tutorial group (BAS) or examination item (MOM).
  4. Grades Fail (U) and Pass (G) are to be used for the examination components Opposition (OPPO) and Attendance at thesis presentation (AUSK) (i.e. part of the degree project).

For mandatory components, the following applies: If special circumstances prevail, and if it is possible with consideration of the nature of the compulsory component, the examiner may decide to replace the compulsory component with another equivalent component. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592). 

For written examinations, the following applies: If the LiU coordinator for students with disabilities has granted a student the right to an adapted examination for a written examination in an examination hall, the student has the right to it. If the coordinator has instead recommended for the student an adapted examination or alternative form of examination, the examiner may grant this if the examiner assesses that it is possible, based on consideration of the course objectives. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).

The examination results for a student are reported at the relevant department.

Regulations (apply to LiU in its entirety)

The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.

LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva. 

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page. There are no files available for this course.