Main field of studyInformation Technology Computer Science and Engineering Electrical Engineering
Course typeProgramme course
Director of studies or equivalentLasse Alfredsson
Available for exchange studentsYes
Main field of studyInformation Technology, Computer Science and Engineering, Electrical Engineering
Course levelSecond cycle
Course offered for
- Computer Science and Engineering, M Sc in Engineering
- Information Technology, M Sc in Engineering
- Biomedical Engineering, M Sc in Engineering
- Computer Science and Software Engineering, M Sc in Engineering
- Applied Physics and Electrical Engineering - International, M Sc in Engineering
- Applied Physics and Electrical Engineering, M Sc in Engineering
The Entrepreneurship part overlap with other CDIO courses and cannot be included more than once in a degree.
Exchange students may apply for the course after arrival to LiTH but before it starts. The Faculty coordinators for exchange studies must be contacted before applying.
Note: Admission requirements for non-programme students usually also include admission requirements for the programme and threshold requirements for progression within the programme, or corresponding.
PrerequisitesThe projects carried out in the course normally require the students to have taken at least one course in fields such as image processing, computer vision, computer graphics, or image coding. All projects require some amount of programming skills, ability in oral and written communication, and project management.
Intended learning outcomes
A project is carried out using industrial practice, and after passing the course the students have demonstrated development and consolidation of competence in the following areas:
- Apply knowledge and methods from previous courses and when necessary new knowledge shall be developed.
- Integrate knowledge from different disciplines, such as image processing, computer vision, computer graphics, image compression, programming, and apply this knowledge in new contexts, such as project work in collaboration with industry or researchers.
- Define requirements for the project based on preliminary specifications, often defined by an external customer, and investigate the conditions under which the project work can be carried out.
- Present the project outcome for the customer and other students, whom are not expected to be experts within the fields of expertise of the students who carried out the work.
- Show the ability to in an independent way manage the project work using a project model and with limited support in terms of supervision.
- Planning, implementation and evaluation of a project.
- Analyzing problems and break down of problems.
- Creative solutions.
- Social competence within the project group.
- Modeling, design and implementation of solution.
The result of the project work shall be:
- Of high technical quality and be based on state-of-the-art knowledge and methods in the technical fields relevant for the project.
- Documented in terms of project plan, project schedule, and technical report.
- Presented orally as well as with a poster.
- Evaluated in a review report.
- When applicable a user-friendly interface should be developed together with a user's manual.
A purpose for the course is also for the students to acquire knowledge and abilities within the general area of entrepreneurship, with particular focus on business planning for new ventures. After passing the course students are able to:
- Account for models that describe what it takes for a new venture to have a stable basis for further development and to assess the level of development of ventures using such models.
- account for the information and analyses needed to evaluate a development project from a business point of view and have the ability to collect and analyze relevant information for the purpose.
Research and application related projects within the field of image analysis, computer vision, computer graphics, image coding, and neural networks. Examples of previous projects are
- Mobile robots.
- Medical image processing.
- 3D reconstruction.
- Simulation of water surfaces
Teaching and working methods
The course has a set of projects proposed by customers external or internal to the university. Student groups will be formed around these projects, based on the knowledge background of the students, suitable mix of competence with a group, and individual preferences of the students. Each project starts by working out a requirement specification and a plan for the remaining part of the project.
The project may be carried out according to the LIPS-model or an alternative model as decided by the examiner, this is, and all documents produced within the project will be written according to the templates described within this model.
|PRA1||Project work||U, G||9 credits|
|UPG1||Entrepreneurship assignments||U, G||3 credits|
GradesTwo grade scale, older version, U, G
DepartmentInstitutionen för systemteknik
Director of Studies or equivalentLasse Alfredsson
Course website and other linkshttps://www.cvl.isy.liu.se/education/undergraduate
Education componentsPreliminary scheduled hours: 52 h
Recommended self-study hours: 268 h
|PRA1||Project work||U, G||9 credits|
|UPG1||Entrepreneurship assignments||U, G||3 credits|
A syllabus has been established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.
Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. A central timetable is not drawn up for courses with fewer than five participants. Most project courses do not have a central timetable.
Interrupting a course
The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: www.lith.liu.se/for-studenter/kurskomplettering?l=sv.
Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The board of studies is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus.
Regulations relating to examinations and examiners
Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.
Forms of examination
Written and oral examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.
Principles for examination scheduling for courses that follow the study periods:
- courses given in VT1 are examined for the first time in March, with re-examination in June and August
- courses given in VT2 are examined for the first time in May, with re-examination in August and October
- courses given in HT1 are examined for the first time in October, with re-examination in January and August
- courses given in HT2 are examined for the first time in January, with re-examination at Easter and in August.
The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2).
- Examinations for courses that the board of studies has decided are to be held in alternate years are held only three times during the year in which the course is given.
- Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.
- If teaching is no longer given for a course, three examination occurrences are held during the immediately subsequent year, while examinations are at the same time held for any replacement course that is given, or alternatively in association with other re-examination opportunities. Furthermore, an examination is held on one further occasion during the next subsequent year, unless the board of studies determines otherwise.
- If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.
Registration for examination
In order to take an examination, a student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.
Symbols used in the examination registration system:
** denotes that the examination is being given for the penultimate time.
* denotes that the examination is being given for the last time.
Code of conduct for students during examinations
Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.
Retakes for higher grade
Students at the Institute of Technology at LiU have the right to retake written examinations and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.
Retakes of other forms of examination
Regulations concerning retakes of other forms of examination than written examinations and computer-based examinations are given in the LiU regulations for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/622678.
For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations.
A failure to specify such sources may be regarded as attempted deception during examination.
Attempts to cheat
In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=sv.
The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). Courses under the auspices of the faculty board of the Faculty of Science and Engineering (Institute of Technology) are to be given special attention in this regard.
- Grades U, 3, 4, 5 are to be awarded for courses that have written examinations.
- Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
- Grades U, 3, 4, 5 are to be awarded for written examinations (TEN).
- Grades Fail (U) and Pass (G) are to be used for undergraduate projects and other independent work.
- Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
- Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as other examination (ANN), tutorial group (BAS) or examination item (MOM).
The examination results for a student are reported at the relevant department.
Regulations (apply to LiU in its entirety)
The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.
LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva.
This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page. There are no files available for this course.