Computer Vision, 12 credits

Datorseende, 12 hp

TSBB15

The course is disused. Offered for the last time Spring semester 2022. Replaced by TSBB33 och TSBB34.

Main field of study

Computer Science and Engineering Electrical Engineering

Course level

Second cycle

Course type

Programme course

Examiner

Per-Erik Forssén

Director of studies or equivalent

Lasse Alfredsson

Education components

Preliminary scheduled hours: 96 h
Recommended self-study hours: 224 h

Available for exchange students

Yes
ECV = Elective / Compulsory / Voluntary
Course offered for Semester Period Timetable module Language Campus ECV
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Chinese 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Chinese 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Chinese (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Chinese (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, French 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, French 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, French (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, French (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, German 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, German 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, German (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, German (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Japanese 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Japanese 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Japanese (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Japanese (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Spanish 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Spanish 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Spanish (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYI Applied Physics and Electrical Engineering - International, M Sc in Engineering, Spanish (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYY Applied Physics and Electrical Engineering, M Sc in Engineering 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CYYY Applied Physics and Electrical Engineering, M Sc in Engineering (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CMED Biomedical Engineering, M Sc in Engineering 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CMED Biomedical Engineering, M Sc in Engineering (Biomedical Image Analysis and Visualization) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering (Autonomous Systems) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CDDD Computer Science and Engineering, M Sc in Engineering (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CMJU Computer Science and Software Engineering, M Sc in Engineering 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CITE Information Technology, M Sc in Engineering 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CITE Information Technology, M Sc in Engineering (Autonomous Systems) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E
6CITE Information Technology, M Sc in Engineering (Signal and Image Processing) 8 (Spring 2021) 1, 2 1, 3 Swedish/English Linköping, Valla E

Main field of study

Computer Science and Engineering, Electrical Engineering

Course level

Second cycle

Advancement level

A1X

Course offered for

  • Computer Science and Engineering, M Sc in Engineering
  • Information Technology, M Sc in Engineering
  • Biomedical Engineering, M Sc in Engineering
  • Applied Physics and Electrical Engineering - International, M Sc in Engineering
  • Applied Physics and Electrical Engineering, M Sc in Engineering
  • Computer Science and Software Engineering, M Sc in Engineering

Specific information

Exchange students may apply for the course after arrival to LiTH but before it starts. The Faculty coordinators for exchange studies must be contacted before applying.

Prerequisites

 

Probability theory, estimation theory, the least-squares-method, partial differential equations, 1D & 2D linear system theory (deterministic and stochastic). 

From for example Multidimensional Signal Analysis: projective spaces, homogeneous representations of 2D and 3D geometry, perspective imaging, camera calibration, epipolar geometry, and frame theory.

Basic image processing: thresholding, segmentation, edge detection.

Use of Python or Matlab.

As half the course consists of a programming project, experience of programming is also recommended.

Intended learning outcomes

After having passed this course, the student is expected to be able to describe problems and algorithms for the following basic computer vision and image processing tasks:

  • tracking of image regions
  • structure from motion estimation
  • estimation of optical flow
  • detection and matching of local image features
  • graph and tree structures and other image representations
  • generative image models
  • segmentation of image regions
  • enhancement of images
  • debugging and visualisation
    These are relevant for applications 3D reconstruction, camera pose estimation, object detection, motion estimation, visualization, and quality control within the areas of 3D vision, object tracking, scientific and industrial image analysis.

     

Course content

Computational methods related to the various applications mentioned in the learning outcomes above. For each application, a number of standard methods are being presented. Necessary mathematics is being introduced. Alternative methods and related research areas are mentioned.

Teaching and working methods

The course consists of two parts that are presented in parallel. One part is more theoretical and is based on a larger number of lectures and computer exercises that present and illustrate basic methods in computer vision. This part concludes with a written examination. The other part is more practical and begins with an introduction to two application areas: 3D-reconstruction and tracking of objects in image sequences. After that follows focused work in small projects and with guidance. The course participants are divided into small groups, and each group carries out both these applied projects, which shall demonstrate a number of methods presented in the theoretical part of the course. The results from each project group are presented orally at seminars and are documented in reports. Guidance for the projects is only given during the course semester. Each project is concluded by an analysis and reflection of the project work.

Examination

LAB1Laboratory Work3 creditsU, G
KTR1Optional Written Test0 creditsU, G
TEN1Written Examination3 creditsU, 3, 4, 5
PRA3Project Assignment 13 creditsU, G
PRA4Project Assignment 23 creditsU, G

The course has a written examination that covers theory and methods introduced in the lectures. Each of the two projects requires implementation, report writing, and an oral presentation in order to pass. The projects are graded with 4 if passed directly. If initially failed, they may be passed with grade 3 after meeting the stipulated requirements. Attaining grade 5 for a project requires, beyond this, an individual or group based work as described on the course web page. The total course grade is a weighted average of the grades from the written examination and the two projects. The voluntary mid-term examination covers the first half of the course. Passing the mid-term examination gives credit points in the written examination TEN1 and allows the student to skip the first half of the TEN1 exam. A passed mid-term examination is valid one year from the date it was written.

Grades

Four-grade scale, LiU, U, 3, 4, 5

Course literature

R. Szeliski: Computer Vision, Algorithms and Applications
Klas Nordberg: Introduction to Representations and Estimation in Geometry. ISY printed manuscript.
Additional material will be handed out or made available on the course web page.

Other information

Supplementary courses: Images and Graphics - Project Course CDIO, Thesis work

About teaching and examination language

The teaching language is presented in the Overview tab for each course. The examination language relates to the teaching language as follows: 

  • If teaching language is Swedish, the course as a whole or in large parts, is taught in Swedish. Please note that although teaching language is Swedish, parts of the course could be given in English. Examination language is Swedish. 
  • If teaching language is Swedish/English, the course as a whole will be taught in English if students without prior knowledge of the Swedish language participate. Examination language is Swedish or English (depending on teaching language). 
  • If teaching language is English, the course as a whole is taught in English. Examination language is English. 

Other

The course is conducted in a manner where both men's and women's experience and knowledge are made visible and developed. 

The planning and implementation of a course should correspond to the course syllabus. The course evaluation should therefore be conducted with the course syllabus as a starting point.  

Department

Institutionen för systemteknik

Director of Studies or equivalent

Lasse Alfredsson

Examiner

Per-Erik Forssén

Course website and other links

http://www.cvl.isy.liu.se/education/undergraduate/tsbb15

Education components

Preliminary scheduled hours: 96 h
Recommended self-study hours: 224 h

Course literature

Books

  • Richard Szeliski, (2011) Computer Vision: Algorithms and Applications Springer
    ISBN: 978-1-84882-935-0
    http://szeliski.org/Book/

Compendia

  • Klas Nordberg, Introduction to Representations and Estimation in Geometry

Other

  • Additional material will be handed out or made available on the course web page.

Code Name Scope Grading scale
LAB1 Laboratory Work 3 credits U, G
KTR1 Optional Written Test 0 credits U, G
TEN1 Written Examination 3 credits U, 3, 4, 5
PRA3 Project Assignment 1 3 credits U, G
PRA4 Project Assignment 2 3 credits U, G

The course has a written examination that covers theory and methods introduced in the lectures. Each of the two projects requires implementation, report writing, and an oral presentation in order to pass. The projects are graded with 4 if passed directly. If initially failed, they may be passed with grade 3 after meeting the stipulated requirements. Attaining grade 5 for a project requires, beyond this, an individual or group based work as described on the course web page. The total course grade is a weighted average of the grades from the written examination and the two projects. The voluntary mid-term examination covers the first half of the course. Passing the mid-term examination gives credit points in the written examination TEN1 and allows the student to skip the first half of the TEN1 exam. A passed mid-term examination is valid one year from the date it was written.

Course syllabus

A syllabus must be established for each course. The syllabus specifies the aim and contents of the course, and the prior knowledge that a student must have in order to be able to benefit from the course.

Timetabling

Courses are timetabled after a decision has been made for this course concerning its assignment to a timetable module. 

Interrupting a course

The vice-chancellor’s decision concerning regulations for registration, deregistration and reporting results (Dnr LiU-2015-01241) states that interruptions in study are to be recorded in Ladok. Thus, all students who do not participate in a course for which they have registered must record the interruption, such that the registration on the course can be removed. Deregistration from a course is carried out using a web-based form: https://www.lith.liu.se/for-studenter/kurskomplettering?l=en. 

Cancelled courses

Courses with few participants (fewer than 10) may be cancelled or organised in a manner that differs from that stated in the course syllabus. The Dean is to deliberate and decide whether a course is to be cancelled or changed from the course syllabus. 

Guidelines relating to examinations and examiners 

For details, see Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, Dnr LiU-2019-00920 (http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).

An examiner must be employed as a teacher at LiU according to the LiU Regulations for Appointments, Dnr LiU-2017-03931 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622784). For courses in second-cycle, the following teachers can be appointed as examiner: Professor (including Adjunct and Visiting Professor), Associate Professor (including Adjunct), Senior Lecturer (including Adjunct and Visiting Senior Lecturer), Research Fellow, or Postdoc. For courses in first-cycle, Assistant Lecturer (including Adjunct and Visiting Assistant Lecturer) can also be appointed as examiner in addition to those listed for second-cycle courses. In exceptional cases, a Part-time Lecturer can also be appointed as an examiner at both first- and second cycle, see Delegation of authority for the Board of Faculty of Science and Engineering.

Forms of examination

Principles for examination

Written and oral examinations and digital and computer-based examinations are held at least three times a year: once immediately after the end of the course, once in August, and once (usually) in one of the re-examination periods. Examinations held at other times are to follow a decision of the board of studies.

Principles for examination scheduling for courses that follow the study periods:

  • courses given in VT1 are examined for the first time in March, with re-examination in June and August
  • courses given in VT2 are examined for the first time in May, with re-examination in August and October
  • courses given in HT1 are examined for the first time in October, with re-examination in January and August
  • courses given in HT2 are examined for the first time in January, with re-examination in March and in August.

The examination schedule is based on the structure of timetable modules, but there may be deviations from this, mainly in the case of courses that are studied and examined for several programmes and in lower grades (i.e. 1 and 2). 

Examinations for courses that the board of studies has decided are to be held in alternate years are held three times during the school year in which the course is given according to the principles stated above.

Examinations for courses that are cancelled or rescheduled such that they are not given in one or several years are held three times during the year that immediately follows the course, with examination scheduling that corresponds to the scheduling that was in force before the course was cancelled or rescheduled.

When a course is given for the last time, the regular examination and two re-examinations will be offered. Thereafter, examinations are phased out by offering three examinations during the following academic year at the same times as the examinations in any substitute course. If there is no substitute course, three examinations will be offered during re-examination periods during the following academic year. Other examination times are decided by the board of studies. In all cases above, the examination is also offered one more time during the academic year after the following, unless the board of studies decides otherwise.

If a course is given during several periods of the year (for programmes, or on different occasions for different programmes) the board or boards of studies determine together the scheduling and frequency of re-examination occasions.

Retakes of other forms of examination

Regulations concerning retakes of other forms of examination than written examinations and digital and computer-based examinations are given in the LiU guidelines for examinations and examiners, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592.

Registration for examination

Until January 31 2021, the following applies according to previous guidelines: In order to take an written, digital or computer-based examination student must register in advance at the Student Portal during the registration period, which opens 30 days before the date of the examination and closes 10 days before it. Candidates are informed of the location of the examination by email, four days in advance. Students who have not registered for an examination run the risk of being refused admittance to the examination, if space is not available.

From February 1 2021, new guidelines applies for registration for written, digital or computer-based examination, Dnr LiU-2020-02033 (https://styrdokument.liu.se/Regelsamling/VisaBeslut/622682).

Symbols used in the examination registration system:

  ** denotes that the examination is being given for the penultimate time.

  * denotes that the examination is being given for the last time.

Code of conduct for students during examinations

Details are given in a decision in the university’s rule book: http://styrdokument.liu.se/Regelsamling/VisaBeslut/622682.

Retakes for higher grade

Students at the Institute of Technology at LiU have the right to retake written examinations and digital and computer-based examinations in an attempt to achieve a higher grade. This is valid for all examination components with code “TEN”, “DIT” and "DAT". The same right may not be exercised for other examination components, unless otherwise specified in the course syllabus.

A retake is not possible on courses that are included in an issued degree diploma. 

Grades

The grades that are preferably to be used are Fail (U), Pass (3), Pass not without distinction (4) and Pass with distinction (5). 

  • Grades U, 3, 4, 5 are to be awarded for courses that have written or digital examinations.
  • Grades Fail (U) and Pass (G) may be awarded for courses with a large degree of practical components such as laboratory work, project work and group work.
  • Grades Fail (U) and Pass (G) are to be used for degree projects and other independent work.

Examination components

The following examination components and associated module codes are used at the Faculty of Science and Engineering:

  • Grades U, 3, 4, 5 are to be awarded for written examinations (TEN) and digital examinations (DIT).
  • Examination components for which the grades Fail (U) and Pass (G) may be awarded are laboratory work (LAB), project work (PRA), preparatory written examination (KTR), digital preparatory written examination (DIK), oral examination (MUN), computer-based examination (DAT), home assignment (HEM), and assignment (UPG).
  • Students receive grades either Fail (U) or Pass (G) for other examination components in which the examination criteria are satisfied principally through active attendance such as tutorial group (BAS) or examination item (MOM).
  • Grades Fail (U) and Pass (G) are to be used for the examination components Opposition (OPPO) and Attendance at thesis presentation (AUSK) (i.e. part of the degree project).

In general, the following applies:

  • Mandatory course components must be scored and given a module code.
  • Examination components that are not scored, cannot be mandatory. Hence, it is voluntary to participate in these examinations, and the voluntariness must be clearly stated. Additionally, if there are any associated conditions to the examination component, these must be clearly stated as well.
  • For courses with more than one examination component with grades U,3,4,5, it shall be clearly stated how the final grade is weighted.

For mandatory components, the following applies: If special circumstances prevail, and if it is possible with consideration of the nature of the compulsory component, the examiner may decide to replace the compulsory component with another equivalent component. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592). 

For written examinations, the following applies: If the LiU coordinator for students with disabilities has granted a student the right to an adapted examination for a written examination in an examination hall, the student has the right to it. If the coordinator has instead recommended for the student an adapted examination or alternative form of examination, the examiner may grant this if the examiner assesses that it is possible, based on consideration of the course objectives. (In accordance with the LiU Guidelines for education and examination for first-cycle and second-cycle education at Linköping University, http://styrdokument.liu.se/Regelsamling/VisaBeslut/917592).

Reporting of examination results

The examination results for a student are reported at the relevant department.

Plagiarism

For examinations that involve the writing of reports, in cases in which it can be assumed that the student has had access to other sources (such as during project work, writing essays, etc.), the material submitted must be prepared in accordance with principles for acceptable practice when referring to sources (references or quotations for which the source is specified) when the text, images, ideas, data, etc. of other people are used. It is also to be made clear whether the author has reused his or her own text, images, ideas, data, etc. from previous examinations, such as degree projects, project reports, etc. (this is sometimes known as “self-plagiarism”).

A failure to specify such sources may be regarded as attempted deception during examination.

Attempts to cheat

In the event of a suspected attempt by a student to cheat during an examination, or when study performance is to be assessed as specified in Chapter 10 of the Higher Education Ordinance, the examiner is to report this to the disciplinary board of the university. Possible consequences for the student are suspension from study and a formal warning. More information is available at https://www.student.liu.se/studenttjanster/lagar-regler-rattigheter?l=en.

Regulations (apply to LiU in its entirety)

The university is a government agency whose operations are regulated by legislation and ordinances, which include the Higher Education Act and the Higher Education Ordinance. In addition to legislation and ordinances, operations are subject to several policy documents. The Linköping University rule book collects currently valid decisions of a regulatory nature taken by the university board, the vice-chancellor and faculty/department boards.

LiU’s rule book for education at first-cycle and second-cycle levels is available at http://styrdokument.liu.se/Regelsamling/Innehall/Utbildning_pa_grund-_och_avancerad_niva. 

Books

Richard Szeliski, (2011) Computer Vision: Algorithms and Applications Springer

ISBN: 978-1-84882-935-0

http://szeliski.org/Book/

Compendia

Klas Nordberg, Introduction to Representations and Estimation in Geometry

Other

Additional material will be handed out or made available on the course web page.

Note: The course matrix might contain more information in Swedish.

I = Introduce, U = Teach, A = Utilize
I U A Modules Comment
1. DISCIPLINARY KNOWLEDGE AND REASONING
1.1 Knowledge of underlying mathematics and science (G1X level)
X
LAB1
TEN1
Linear algebra, Calculus, Signal processing, Projective Geometry
1.2 Fundamental engineering knowledge (G1X level)
X
X
X
LAB1
TEN1
Optical flow, Image enhancement
1.3 Further knowledge, methods, and tools in one or several subjects in engineering or natural science (G2X level)
X
X
X
LAB1
TEN1
Tracking of objects in an video, reconstruction of 3D objects from multiple views
1.4 Advanced knowledge, methods, and tools in one or several subjects in engineering or natural sciences (A1X level)
X
X
X
TEN1

                            
1.5 Insight into current research and development work
X
X
X
TEN1

                            
2. PERSONAL AND PROFESSIONAL SKILLS AND ATTRIBUTES
2.1 Analytical reasoning and problem solving
X
X
LAB1
Planning and execution of two projects
2.2 Experimentation, investigation, and knowledge discovery
X
Testing of alternative approaches
2.3 System thinking
X
X
LAB1
Software design and integration
2.4 Attitudes, thought, and learning
X
LAB1
Personal responsibility for specific project parts
2.5 Ethics, equity, and other responsibilities
X
Planning and execution of two projects
3. INTERPERSONAL SKILLS: TEAMWORK AND COMMUNICATION
3.1 Teamwork
X
Planning and execution of two projects
3.2 Communications
X
Written and oral presentation of project results
3.3 Communication in foreign languages
X
When the course is given in English
4. CONCEIVING, DESIGNING, IMPLEMENTING AND OPERATING SYSTEMS IN THE ENTERPRISE, SOCIETAL AND ENVIRONMENTAL CONTEXT
4.1 External, societal, and environmental context

                            
4.2 Enterprise and business context

                            
4.3 Conceiving, system engineering and management
X
Project plans are used in the projects
4.4 Designing
X
Project work
4.5 Implementing
X
Project work
4.6 Operating

                            
5. PLANNING, EXECUTION AND PRESENTATION OF RESEARCH DEVELOPMENT PROJECTS WITH RESPECT TO SCIENTIFIC AND SOCIETAL NEEDS AND REQUIREMENTS
5.1 Societal conditions, including economic, social, and ecological aspects of sustainable development for knowledge development

                            
5.2 Economic conditions for knowledge development

                            
5.3 Identification of needs, structuring and planning of research or development projects
X
Project plans are used in the projects
5.4 Execution of research or development projects
X
The course has two programming projects
5.5 Presentation and evaluation of research or development projects
X
Report writing according to a template structure. Oral presentation.

This tab contains public material from the course room in Lisam. The information published here is not legally binding, such material can be found under the other tabs on this page.

There are no files available for this course.